Login
Password
Sign Up
cardsharing-server.tv - Globo configuration


What is Cardsharing?

Cardsharing is nothing else than distribution of DW keys from official card to other users via Internet or LAN. The functions of a server distributing the keys for a particular package can be performed by Dreambox – a satellite receiver based on Linux operating system, a computer with an attached programmer and appropriate software, and others. Every 10 seconds DW keys are read from the card, and these keys are sent to all users connected to the server (of course not for free). Given that the key is changed every 10 seconds, to use this service you must have an Internet connection with megabyte billing.

Key distribution consumes very little Internet traffic – about 80-250 kB per hour viewing at an average. But in this case the Internet connection must be rather qualitative. If your Internet is bad, the losses will occur, and at this point the image on your TV will freeze or pour. At the moment, the key distribution is carried out using two main protocols: Newcamd 525 (TCP), Camd 357 (UDP). The maximum resistance against package losses have TCP protocols, i.e., Newcamd 525. But at this time they consume a little more traffic (slightly different from Samd 357). This is important only for those who use GPRS

You can read about the procedure of connection to cardsharing HERE

Sharing with Globo receivers

To configure cardsharing we need to have:

  1. GLOBO receiver
  2. RS232 cable (the same as for flashing)
  3. Antenna tuned for the satellite you want to watch
  4. Computer with access to Internet
  5. mpcs_Globo_ide program
  6. Subscription or test for sharing (available HERE)

Configuring mpcs_Globo_client_ide program

For example, you get the data for connection of NTV+ Russian package which are the following:

Protocol - Newcamd525
IP(server name) - cservX.net
Port - 10000
Login - login
Password - password
DES Key - 0102030405060708091011121314
IDENT - 0500:023700
    
Download and unpack the program archive. Use the Total Commander program to press F4 button, or any text editor to begin edit configuration files of mpcs_Globo_client_ide program.

mpcs.conf

[global]
Nice            = -20
#LogFile         = log
#LogFile         = /dev/tty
LogFile = stdout
ClientTimeout   = 11
FallbackTimeout = 7
ClientMaxIdle = 99999
CacheDelay = 120
globo7010 =1
[serial]
Device = tuner@/dev/ttyS0
    
Where:
  • ttyS0 is COM port 1 of your computer to which you connect the null modem cable;
  • ttyS1 is COM port 2 of your computer to which you connect the null modem cable;
If you are the owner of bad Internet, I advise you to set the following:

[serial]
Device = tuner@/dev/ttyS0?delay=2&timeout=1000
    
Thus, when packages are lost, your image will be damaged not so often.

mpcs.server

[reader]
Label = NTV+
Protocol = newcamd
Key = 0102030405060708091011121314
Device = cservX.net,10000  # the name or IP address of the server and the port change to one that you have been given
Account = login,password  #should be changed with your data
Fallback = 0
Group = 1
ReconnectTimeout  = 100
#InactivityTimeOut = 15   # if you activate this option, the program connection will be aborted after n minutes of inactivity.
    
mpcs.user

[account]
User = tuner
Pwd = tuner
Group = 1
IDENT = 0500:023700   # should be changed with your data, in this case the specified package is NTV+ Russia
    
Where:
  • 0500 is the encryption type (Viaccess)
  • 023700 is ID number of NTV+ Russia package
  • P.S # – this line is not active.
Let us consider connection of 2 packages from the same server, for example, NTV+ Russia (36e) and Viasat Baltic (5e/75e)

mpcs.conf

[global]
Nice            = -20
#LogFile         = log
#LogFile         = /dev/tty
LogFile = stdout
ClientTimeout   = 11
FallbackTimeout = 7
ClientMaxIdle = 99999
CacheDelay = 120
globo7010 = 1
[serial]
Device=  tuner@/dev/ttyS0?delay=2&timeout=1000
    
mpcs.server

[reader]
Label = NTV+
Protocol = newcamd
Key =  0102030405060708091011121314
Device = cservX.net,10000  # the name or IP address of the server and the port change to one that you have been given
Account = login,password   # should be changed with your data
Fallback = 0
Group = 1
ReconnectTimeout  = 100
#InactivityTimeOut = 15   # if you activate this option, the program connection will be aborted after n minutes of inactivity.

[reader]
Label = Viasat
Protocol = newcamd
Key =  0102030405060708091011121314
Device = cservX.net,10001  # the name or IP address of the server and the port change to one that you have been given
Account = login,password   # should be changed with your data
Fallback = 0
Group = 1
ReconnectTimeout  = 100
#InactivityTimeOut = 15   # if you activate this option, the program connection will be aborted after n minutes of inactivity.
    
mpcs.user

[account]
User = tuner
Pwd = tuner
Group = 1
IDENT = 0500:023700;090f:000000   # should be changed with your data, in this case the specified package is NTV+ Russia and Viasat Baltic
    
Where:
  • 0500 is the encryption type (Viaccess)
  • 090f is the encryption type (Videoguard)
  • 023700 is ID number of NTV+ Russia package
  • 000000 is ID number of Viasat Baltic package
To configure the Orion Express (80e) package you need, except as described above, to add some options in the MPCS program:

mpcs.guess

Instead the line 34:0604 it is necessary to enter 34:0602
    
mpcs.user

[account]
User = tuner
Pwd = tuner
Group = 1
ChID = 0602:01 
IDENT = 0602:00000
    
To configure the Nova (13e) package you need, except as described above, to add some options in the MPCS program:

mpcs.guess

Enter  34:0604
    
mpcs.user

[account]
User = tuner
Pwd = tuner
Group = 1
ChID = 0604:14
IDENT = 0604:00000
    
Proceed to configuring the receiver:
  1. Turn on the receiver.
  2. Select any channel of the ordered package.
  3. Type using remote control the combination of numbers 9339.
  4. In opened window select Card Share and press OK.
  5. In opened list select Newcamd and press OK.
  6. Leave Newcamd settings unchanged, just press EXIT twice on the remote control to exit the menu.

Questions concerning the operation of these receivers can be put on the forum about satellite TV


Completing one payment balance
15 $ get 20 $
20 $ get 28 $
25 $ get 38 $
30 $ get 48 $
35 $ get 60 $
40 $ get 72 $
45 $ get 86 $
50 $ get 100 $

For dealers:
15 $ get 17,5 $
20 $ get 24 $
25 $ get 31,5 $
30 $ get 39 $
35 $ get 47,5 $
40 $ get 56 $
45 $ get 65,1 $
50 $ get 75 $
100 $ get 200 $
We accept:
WebMoney Z
Bitcoin
Visa/MasterCard
LiqPay
W1
Яндекс.Деньги
OK PAY
PerfectMoney USD
Contact RUR
Contact USD
Альфа-Клик [Альфа.Банк]
Приват24
Терминалы QIWI (КИВИ)
Eвросеть
Сбербанк РФ
Юнистрим RUR
МТС
Beeline SMS
TELE2
ПромСвязь Банк
PAYEER
Мегафон

Satellite television. Satellite television. Cardsharing Card sharing Server free cccam line .

Cardsharing-Server LLC © 2005-2016. All rights reserved and belong to the resource owners. Copying of materials is prohibited.