Login
Password
Sign Up
cardsharing-server.tv - Openbox 7xx configuration


What is Cardsharing?

Cardsharing is nothing else than distribution of DW keys from official card to other users via Internet or LAN. The functions of a server distributing the keys for a particular package can be performed by Dreambox – a satellite receiver based on Linux operating system, a computer with an attached programmer and appropriate software, and others. Every 10 seconds DW keys are read from the card, and these keys are sent to all users connected to the server (of course not for free). Given that the key is changed every 10 seconds, to use this service you must have an Internet connection with megabyte billing.

Key distribution consumes very little Internet traffic – about 80-250 kB per hour viewing at an average. But in this case the Internet connection must be rather qualitative. If your Internet is bad, the losses will occur, and at this point the image on your TV will freeze or pour. At the moment, the key distribution is carried out using two main protocols: Newcamd 525 (TCP), Camd 357 (UDP). The maximum resistance against package losses have TCP protocols, i.e., Newcamd 525. But at this time they consume a little more traffic (slightly different from Samd 357). This is important only for those who use GPRS

You can read about the procedure of connection to cardsharing HERE

Sharing with Openbox 7xx Receivers
Suppose we have found online offer for sharing NTV+ package via Newcamd 525 protocol.
In order to begin enjoy watching your favourite channels, you would do the following:
  1. On the remote control press Menu button.
  2. Successively type 8282 series of numbers and enter the emulator menu
  3. Use the blue button to go to Sharing menu.
  4. Use red Add slot button on the remote control to add in the left part of the screen, using “up" and "down" "OK" buttons, the value 0500 – this is the number of Viaccess encryption. When typing complete, press OK on the remote control. Moving in the right half of the table, press the red button on the remote control and move 023700 value – provider’s identification number, in this case for NTV+ package with Viaccess 2.6 encryption.

After that your tuner is ready to use the COM port to receive the keys designed for 0500 encryption (Viaccess), 023700 package (NTV+).
It now remains to configure the computer program which will take the keys from the server via Internet and send them to the tuner.
The most stable program for sharing is mpcs_ide program.
MPCS Setup
Use the Total Commander program to press F4 button, or any text editor to begin edit configuration files of mpcs_client program

mpcs.conf
[global]
Nice            = -20
#LogFile         = log
#LogFile         = /dev/tty
LogFile = stdout
ClientTimeout   = 11
FallbackTimeout = 7
ClientMaxIdle = 99999
CacheDelay = 120
[serial]
Device = tuner@/dev/ttyS0
Where:
  • ttyS0 is COM port 1 of your computer to which you connect the null modem cable;
  • ttyS1 is COM port 2 of your computer to which you connect the null modem cable;
If you are the owner of bad Internet, I advise you to set the following:
[serial]
Device = tuner@/dev/ttyS0?delay=2&timeout=1000
Thus, when packages are lost, your image will be damaged not so often.

mpcs.server
[reader]
Label = NTV+
Protocol = newcamd
Key = 0102030405060708091011121314
Device = cservX.net,10000 # the name or IP address of the server and the port change to one that you have been given
Account = login,  password # should be changed with your data
Fallback = 0 
Group = 1
ReconnectTimeout = 100
#InactivityTimeOut = 15# - if you activate this option, the program connection will be aborted after n minutes of inactivity.
mpcs.user
[account]
User = tuner
Pwd = tuner
Group = 1
IDENT = 0500:023700 #- should be changed with your data, in this case the specified package is NTV+ Russia
Where:
  • 0500 is the encryption type (Viaccess)
  • 023700 is ID number of NTV+ Russia package
P.S: # – this line is not active.

Let us consider connection of 2 packages from the same server, for example, NTV+ Russia (36e) and Viasat Baltic (5e/75e)
In sharing settings of receiver in addition to CAID 0500 and IDENT 00023700 prescribe also CAID 090f for Viasat Baltic package with unchanged IDENT 00 00 00 00

mpcs.conf
[global]
Nice            = -20
#LogFile         = log
#LogFile         = /dev/tty
LogFile = stdout
ClientTimeout   = 11
FallbackTimeout = 7
ClientMaxIdle = 99999
CacheDelay = 120
[serial]
Device = tuner@/dev/ttyS0?delay=2&timeout=1000
mpcs.server

[reader]
Label = NTV+
Protocol = newcamd
Key = 0102030405060708091011121314
Device = cservX.net,10000  # the name or IP address of the server and the port change to one that you have been given
Account = login,  password  # should be changed with your data
Fallback = 0
Group = 1
ReconnectTimeout = 100
#InactivityTimeOut = 15  # if you activate this option, the program connection will be aborted after n minutes of inactivity.

[reader]
Label = Viasat
Protocol = newcamd
Key = 0102030405060708091011121314
Device = cservX.net,10000  # the name or IP address of the server and the port change to one that you have been given
Account = login,  password  # should be changed with your data
Fallback = 0
Group = 1
ReconnectTimeout = 100
#InactivityTimeOut = 15 # if you activate this option, the program connection will be aborted after n minutes of inactivity.
mpcs.user
[account]
User = tuner
Pwd = tuner
Group = 1
IDENT = 0500:023700;090f:000000  # should be changed with your data, in this case the specified package is NTV+ Russia and Viasat Baltic
Where:
  • 0500 is the encryption type (Viaccess)
  • 090f is the encryption type (Videoguard)
  • 023700 is ID number of NTV+ Russia package
  • 000000 is ID number of Viasat Baltic package

To configure the Orion Express (80e) package you need, except as described above, to add some options in the MPCS program:

mpcs.guess
Instead the line 34:0604 it is necessary to enter 34:0602
mpcs.user
[account]
User = tuner 
Pwd = tuner 
Group = 1 
ChID = 0602:01 
IDENT = 0602:00000

Upon that prescribe in the receiver CAID – 0602, IDENT – 00 00 01

In order to learn settings of this program in more detail, do not forget to read the readme.txt, available inside the archive.

Do not forget to check that our computer has running any firewall or Windows Firewall, blocking cardsharing port and IP, if any, than we allow it to connect via the port xxxxx of IP yyyyyy.

After all the changes complete, connect the tuner to computer using null modem cable, switch on the channel that you want to share, activate Internet on your computer, run mpcs_client.exe and enjoy the viewing...

It is strictly forbidden to use OpenboxShare program with our server !!!

Questions concerning the operation of these receivers can be put on the forum about satellite TV


Completing one payment balance
15 $ get 20 $
20 $ get 28 $
25 $ get 38 $
30 $ get 48 $
35 $ get 60 $
40 $ get 72 $
45 $ get 86 $
50 $ get 100 $

For dealers:
15 $ get 17,5 $
20 $ get 24 $
25 $ get 31,5 $
30 $ get 39 $
35 $ get 47,5 $
40 $ get 56 $
45 $ get 65,1 $
50 $ get 75 $
100 $ get 200 $
We accept:
WebMoney Z
Bitcoin
Visa/MasterCard
LiqPay
W1
Яндекс.Деньги
OK PAY
PerfectMoney USD
Contact RUR
Contact USD
Альфа-Клик [Альфа.Банк]
Приват24
Терминалы QIWI (КИВИ)
Eвросеть
Сбербанк РФ
Юнистрим RUR
МТС
Beeline SMS
TELE2
ПромСвязь Банк
PAYEER
Мегафон

Satellite television. Satellite television. Cardsharing Card sharing Server free cccam line .

Cardsharing-Server LLC © 2005-2016. All rights reserved and belong to the resource owners. Copying of materials is prohibited.