Login
Password
Sign Up
cardsharing-server.tv - Samsung configuration


What is Cardsharing?

Cardsharing is nothing else than distribution of DW keys from official card to other users via Internet or LAN. The functions of a server distributing the keys for a particular package can be performed by Dreambox – a satellite receiver based on Linux operating system, a computer with an attached programmer and appropriate software, and others. Every 10 seconds DW keys are read from the card, and these keys are sent to all users connected to the server (of course not for free). Given that the key is changed every 10 seconds, to use this service you must have an Internet connection with megabyte billing.

Key distribution consumes very little Internet traffic – about 80-250 kB per hour viewing at an average. But in this case the Internet connection must be rather qualitative. If your Internet is bad, the losses will occur, and at this point the image on your TV will freeze or pour. At the moment, the key distribution is carried out using two main protocols: Newcamd 525 (TCP), Camd 357 (UDP). The maximum resistance against package losses have TCP protocols, i.e., Newcamd 525. But at this time they consume a little more traffic (slightly different from Samd 357). This is important only for those who use GPRS

You can read about the procedure of connection to cardsharing HERE

Sharing with Samsung 9500 receivers

Suppose we have found online offer for sharing NTV+ package via Newcamd 525 protocol.
In order to begin enjoy watching your favourite channels, you would do the following:
  1. Connect receiver to computer using the cable extension for COM-port.
  2. Switch the receiver on the channel that you want to share.
  3. Press red "i" button twice on the receiver panel.
  4. In the window that appears, you must, using “Pg+” and “Pg–” buttons on the panel, set on the right side the desired Ident (for example, 023770 for NTV+ package.) You can ask for it your sharing provider.
In latest versions of software the package ident is already selected by pressing "Exit" button on the remote control followed by selection of desired package ident with "/\" and "\/" buttons.
This procedure is true for the case when in emulator settings the MANUAL CAID mode is set, and when the AUTO CAID mode is set, the receiver will choose itself which ident would be used to communicate with a server.

The latest versions of software require that the MANUAL CAID mode to be set !!!!



In latest versions of software the emulator mode is enabled by fast pressing 0 + MENU buttons on the remote control. Here we need to activate the emulator itself, enable emulation mode without smart cards, to allow, if necessary, EMM for card (update of official cards), and set, if necessary, the MANUAL CAID mode.
After that, your receiver is ready to receive the keys via the COM port for this channel.
It now remains to configure the computer program which will take the keys from the server via Internet and send them to the tuner.
The most stable program for sharing is mpcs_ide program.
For example, to view the NTV+ and Viasat package we were given such initialization string:
CWS = cservX.net 10000 login password 0102030405060708091011121314
CWS = cservX.net 10001 login password 0102030405060708091011121314
Where:
  1. cservX.net is the name or IP address of the server;
  2. 10000 is the port through which the sharing of NTV+ Russia package will be moved;
  3. 10001 is the port through which the sharing of Viasat Baltic package will be moved;
  4. login - Login;
  5. password - Password;
  6. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 - encryption key of the stream.
First, we need to change the data of the following files: use the Total Commander program to press F4 button, or any text editor to begin edit configuration files of mpcs_client_ide program

mpcs.conf
[global]
Nice            = -20
#LogFile         = log
#LogFile         = /dev/tty
LogFile = stdout
ClientTimeout   = 11
FallbackTimeout = 7
ClientMaxIdle = 99999
CacheDelay = 120
[serial]
Device = tuner@/dev/ttyS0
Where:
  • ttyS0 is COM port 1 of your computer to which you connect the null modem cable;
  • ttyS1 is COM port 2 of your computer to which you connect the null modem cable;
If you are the owner of bad Internet, I advise you to set the following:
[serial]
Device = tuner@/dev/ttyS0?delay=2&timeout=1000
Thus, when packages are lost, your image will be damaged not so often, but at the same time the channels will be switched a little slower.

mpcs.server

[reader]
Label = NTV+
Protocol = newcamd
Key = 0102030405060708091011121314
Device = cservX.net,10000# -
the name or IP address of the server and the port change to one that you have been given
Account = login, password# - should be changed with your data
Fallback = 0
Group = 1
ReconnectTimeout = 100
#InactivityTimeOut = 15# - if you activate this option, the program connection will be aborted after n  minutes of inactivity.
mpcs.user

[account]
User = tuner
Pwd = tuner
Group = 1
IDENT = 0500:023700 # - should be changed with your data, in this case the specified package is NTV+ Russia
Where:
  • 0500 is the encryption type (Viaccess)
  • 023700 is ID number of NTV+ Russia package
P.S # - this line is not active.

Let us consider connection of 2 packages from the same server, for example, NTV+ Russia (36e) and Viasat Baltic (5e/75e)

mpcs.conf

[global]
Nice            = -20
#LogFile         = log
#LogFile         = /dev/tty
LogFile = stdout
ClientTimeout   = 11
FallbackTimeout = 7
ClientMaxIdle = 99999
CacheDelay = 120
[serial]
Device = tuner@/dev/ttyS0?delay=2&timeout=1000
mpcs.server

[reader]
Label = NTV+
Protocol = newcamd
Key = 0102030405060708091011121314
Device = cservX.net,10000 # the name or IP address of the server and the port change to one that you have been given
Account = login, password # should be changed with your data
Fallback = 0
Group = 1
ReconnectTimeout = 100
#InactivityTimeOut = 15 # if you activate this option, the program connection will be aborted after n  minutes of inactivity.

[reader]
Label = Viasat
Protocol = newcamd
Key = 0102030405060708091011121314
Device = cservX.net,10001 # the name or IP address of the server and the port change to one that you have been given
Account = login, password # should be changed with your data
Fallback = 0
Group = 1
ReconnectTimeout = 100
#InactivityTimeOut = 15 # if you activate this option, the program connection will be aborted after n  minutes of inactivity.
mpcs.user

[account]
User = tuner
Pwd = tuner
Group = 1
IDENT = 0500:023700;090f:000000 # - should be changed with your data, in this case the specified package is NTV+ Russia and Viasat
Where:
  • 0500 is the encryption type (Viaccess)
  • 023700 is ID number of NTV+ Russia package
  • 090f is the encryption type (Videoguard)
  • 000000 is ID number of Viasat Baltic package
To configure the Orion Express (80e) package you need, except as described above, to add some options in the MPCS program:

mpcs.guess
Instead the line 34:0604 it is necessary to enter 34:0602
mpcs.user

[account]
User = tuner
Pwd = tuner
Group = 1
ChID = 0602:01 
IDENT = 0602:00000

In order to learn settings of this program in more detail, do not forget to read the readme.txt, available inside the archive.

Do not forget to check that our computer has running any firewall or Windows Firewall, blocking cardsharing port and IP, if any, than we allow it to connect via the port xxxxx of IP yyyyyy.

After all the changes complete, connect the tuner to computer using null modem cable, switch on the channel that you want to share, activate Internet on your computer, run mpcs_client.exe and enjoy the viewing...

Questions concerning the operation of these receivers can be put on the forum about satellite TV


Completing one payment balance
15 $ get 20 $
20 $ get 28 $
25 $ get 38 $
30 $ get 48 $
35 $ get 60 $
40 $ get 72 $
45 $ get 86 $
50 $ get 100 $

For dealers:
15 $ get 17,5 $
20 $ get 24 $
25 $ get 31,5 $
30 $ get 39 $
35 $ get 47,5 $
40 $ get 56 $
45 $ get 65,1 $
50 $ get 75 $
100 $ get 200 $
We accept:
WebMoney Z
Bitcoin
Visa/MasterCard
LiqPay
W1
Яндекс.Деньги
OK PAY
PerfectMoney USD
Contact RUR
Contact USD
Альфа-Клик [Альфа.Банк]
Приват24
Терминалы QIWI (КИВИ)
Eвросеть
Сбербанк РФ
Юнистрим RUR
МТС
Beeline SMS
TELE2
ПромСвязь Банк
PAYEER
Мегафон

Satellite television. Satellite television. Cardsharing Card sharing Server free cccam line .

Cardsharing-Server LLC © 2005-2016. All rights reserved and belong to the resource owners. Copying of materials is prohibited.