cardsharing-server

ONLY QUALITY SERVICE

Take the opportunity to connect
to cardsharing and IPTV.

learn more

Sharingan of receivers Openbox 300, 5xx, 8xx

Let's, we found on the internet offer for card sharing on NTV + package on Newcamd Protocol 525.

To start enjoy watching your favorite channels will need to do the following:

1. Press the button on the remote – Menu.

2. Consistently dial a series of numbers 1117 and get into the emulator menu.

3. Go to section – Sharing.

4. On the left side of the screen using the green button on the remote – Add, add using the buttons “up” and “way down” value – 0500 – Viaccess is a code number. At the end we press on the remote control set OK. We are moving in the right half of the table, press the red button on the remote – Edit and drive value 023700 – provider identification number, in this case the packet NTV + Roos.

After that, your tuner ready to receive the keys via the COM port, designed to encode 0500 (Viaccess), package 023700 (Russian NTV +).

It now remains to be configured to program a computer, which will take the keys to the server via the Internet and send them to the tuner.

The most stable in the work program is to sharinga – mpcs_ide

Setting MPCS

First, we need to change the data of the following files:

With this program, Total Commander button F4 We begin to edit files:

mpcs.conf

[global]

Nice = -20

#LogFile = log

#LogFile = /dev/tty

LogFile = stdout

ClientTimeout = 11

FallbackTimeout = 7

ClientMaxIdle = 99999

CacheDelay = 120

[serial]

Device = tuner@/dev/ttyS0

where ttyS0 – COM port 1 your computer, to which you connect the null-modem cable;

ttyS1 – COM port 2 your computer, to which you connect the null-modem cable;

If you are the owner of a dead Internet, I advise you to put the following:

[serial]

Device = tuner@/dev/ttyS0?delay=2&timeout=1000

Thus, when the lost packets have not often will tear the picture, but the channels at the same time start a little slower to switch.

mpcs.server

[reader]

Label = NTV+

Protocol = newcamd

Key = 0102030405060708091011121314

Device = cservX.net,10000 # – name, or the server IP address and port change on the one that you have been given

Account = login, password # – changes to their

Fallback = 0

Group = 1

ReconnectTimeout = 100

#InactivityTimeOut = 15 # – If you activate this option, the compound program is forced to break off after n minutes of inactivity.

mpcs.user

[account]

User = tuner

Pwd = tuner

Group = 1

IDENT = 0500:023700 # – changes to their, in this case, registered NTV + package in Russia

Where : 0500 – encoding type (Viaccess)

023700 – NTV package identification number + Russia

P.S # – this line is not active.

Consider the connection 2 packets from one server, eg – Russian NTV + (36e) и Viasat Baltic (5e / 75e)

The receiver's card sharing settings in addition to the CAID 0500 и IDENT 023700 prescribe more and CAID 090f for Viasat Baltic package, while IDENT for him leaving unchanged XXXXXXXX

mpcs.conf

[global]

Nice = -20

#LogFile = log

#LogFile = /dev/tty

LogFile = stdout

ClientTimeout = 11

FallbackTimeout = 7

ClientMaxIdle = 99999

CacheDelay = 120

[serial]

Device = tuner@/dev/ttyS0?delay=2&timeout=1000

mpcs.server

[reader]

Label = NTV+

Protocol = newcamd

Key = 0102030405060708091011121314

Device = cservX.net,10000 # – name, or the server IP address and port change on the one that you have been given

Account = login, password # – changes to their

Fallback = 0

Group = 1

ReconnectTimeout = 100

#InactivityTimeOut = 15 # – If you activate this option, the compound program is forced to break off after n minutes of inactivity.

[reader]

Label = Viasat

Protocol = newcamd

Key = 0102030405060708091011121314

Device = cservX.net,10001 # – name, or the server IP address and port change on the one that you have been given

Account = login, password # – changes to their

Fallback = 0

Group = 1

ReconnectTimeout = 100

#InactivityTimeOut = 15 # – If you activate this option, the compound program is forced to break off after n minutes of inactivity.

mpcs.user

[account]

User = tuner

Pwd = tuner

Group = 1

IDENT = 0500:023700;090f:000000 # – changes to their,in this case the prescribed package of NTV + and Viasat Russia

Where : 0500 – encoding type (Viaccess)

023700 – NTV package identification number + Russia

090f – encoding type (Videoguard)

000000 – Viasat Baltic packet identification number

To configure Orion Express package ( 80e ) MPCS needed in the program except the above, to add some parameters:

mpcs.guess

instead of a string 34:0604 it is necessary to register 34:0602

mpcs.user

[account]

User = tuner

Pwd = tuner

Group = 1

ChID = 0602:01

IDENT = 0602:00000

The receiver thus prescribes CAID – 0602, CHID – 0001, IDENT – 00 00 00 FF FF FF FF FF FF – For software versions prior to 5.28

and CASYSID – 0602, PROV ID – 00 00 01 – For software versions 5.28 and higher.

If you need prosmotrotr NTV + package grew (023700) with NTV + in Ukrainian (020710), then do the following:

1. Prescribe the needed ID packets in the settings sharinga resiera (Menu – 1117 – Sharing)

CASYSID PROV ID

0500 023700

0500 020710

After editing the ID packet in the receiver, you need to use the program pobedit0922 sharinga merge settings with the keys on the laptop (the keys – Receive), they also remain in the program the next time it starts, that we will need in the future.

2. Use the correct ID packet to the current channel has been realizovvano, starting with SW 5.28. After that, you have verified, that the receiver is filled your desired software and scanned the dates of your channel packages, you need to save all channel settings to save on Computers with the help of the program pobedit0922

Assigning provider / Biss key channel:

  • to win in the TV section of the channels, stand on which channel or coded in Charite Biss (highlighted in green) The same can be done and the list “favorite” selecting any of the following.
  • to assign multiple channels, such as NTV +, you will need to select a channel +++, on the keyboard press and hold Shift + up or down button to select multiple channels or press and hold Ctrl + the left mouse button, snapping the channels
  • The key to the combo box select the appropriate Biss key or provider (assignment happens when you click the left mouse button)
  • save the file, pour it into the receiver (settings – to send).

3. The config mpcs.user ID string would look like this

IDENT = 0500:023700,020710

To examine the configuration of the program in more detail, do not forget to read readme.txt, Available in archive.

Memorable make sure that we have on the computer is not running any firewall, vydovыy or firewall, blocking the port CS, and IP, if available, then allow him a compound of the port on the xxxxx IP yyyyyy.

After all changes, connect tuner null modem cable and the computer, includes a channel, you're going to fumble, activate Internet on your computer, launching mpcs_client.exe and enjoy the view….

strictly prohibited use on our server program OpenboxShare !!!

Questions about these receivers can be set to Forum about satellite TV

good to know, we Accept

WebMoney Z

Bitcoin

Visa / Mastercard

LiqPay

W1

Yandex money

OK PAY

PerfectMoney USD

Contact RUR

Contact USD

Alpha click [Alfa Bank]

Privat24

terminal QIWI (KIWI)

Evroset

Sberbank

Unistream RUR

MTS

Beeline SMS

TELE2

PromSviaz Bank

PAYEER

Megaphone

good to know

Adding one payment balance:

15 $ get 20 $

20 $ get 28 $

25 $ get 38 $

30 $ get 48 $

35 $ get 60 $

40 $ get 72 $

45 $ get 86 $

50 $ get 100 $

Reseller:

15 $ get 17,5 $

20 $ get 24 $

25 $ get 31,5 $

30 $ get 39 $

35 $ get 47,5 $

40 $ get 56 $

45 $ get 65,1 $

50 $ get 75 $

100 $ get 200 $

What is Cardsharing ?

Kardşaring - nothing else, as the distribution of other users with the official DW key card via the Internet or a local area network. As a server, handing out the keys on a specific package, can serve Dreambox - satellite receiver based on the Linux operating system, a computer with a connected programmer and appropriate software and some other. every 10 sec. DW is read from the card keys, these keys are sent to all users, connected to the server (of course not for free). In view of the, that occurs every shift key 10 seconds, To use this service you must have an Internet connection with MBs charging.

Key handover eat off very little Internet traffic, the average for hour view 80 -250 kb. But at the same Internet connection must be pretty high quality. If the Internet "dead", the loss will occur and at that moment the picture on your TV will freeze or pour. Currently key distribution is carried out by the 2nd main protocols: Newcamd 525 (TCP), Cmd 357 (UDP). The most resistant to packet loss are TCP protocols, ie Newcamd 525. But they consume a little more traffic (Unlike small from Samd 357). This is important only for those, who uses GPRS.

Familiarize yourself with prodseduroy can connect to Cardsharing HERE